Deck fascia boards provide the perfect finishing touch and create a smooth, streamlined look for your composite wood deck. Fascia boards create a band of wood bordering the deck just below the surface line to hide the joists underneath and elevate the overall appearance of the deck.
Naturally, for the most seamless, aesthetically pleasing look, as well as for durability and low-maintenance, you will want your fascia boards to be made of the same composite wood material as the rest of your deck, which is why NewTechWood is happy to offer fascia boards among our line of quality products.
- US05 11 x 0.6 in
(285 x 15mm)
NewTechWood composite wood decking boards have 360-degree capping to completely seal and protect your boards from environmental hazards, moisture and decay, but this still leaves the end cut areas to consider. Fortunately, we offer a choice of moisture seals and end caps that work perfectly with our products, fitting in seamlessly with the board of the deck and offering your end cut areas ultimate protection.
- Board: UH02 | End Cap: EC-UH02 5.5 x 0.9 in
(138 x 22.5mm)
More about End Caps
Moisture can penetrate to the core in the end-cut area and could cause swelling, cupping and cracking at the edge area. All NewTechWood® End Caps are made of TPO Plastic which is durable and has high impact resistance under harsh weather conditions and extreme low temperature of – 40°C.
- Solid Board: Moisture seal should be applied at the end-cut
- Hollow Board: End-Cap should be installed at the end-cut
- Solid Board:
Apply the Water-based Sealer at the edges using brush
- Hollow Board:
Step 1/2: Apply the silicone sealant
Option 1 : At the deges of the board
Option 2 : On the end cap
- Hollow Board:
Step 2/2: Install the end cap onto the hollow board
If you somehow sustain tiny scratches, holes or chips to your composite deck, all is not lost. We have just the product to have your deck looking as good as new.
NewTechWood DeScratch Repair Kit for mending small scratches, splits, nail holes, chips, gouges & damaged edges in capped composite or natural timber.
- Remove any high points using the applicator
- Rub the wax over the damaged area until level
- Remove any excess wax using the applicator
Each pack contains: 0.4 x 0.39in Darker tone Wax Stick, 0.039 x 0.39in Lighter tone Wax Stick, 1 x pcs Applicator (*Charcoal color has 2 same tone sticks)
Measurements: W 3.5 x H 6.3 x D 0.6in (W 8 x H 16 x D 2cm)
Quantity: 10 packs/box
Standard colours: Antique, Maple, Teak, Ipe, Walnut, Redwood, Smoke White, Light Gray, Charcoal, Oak, Sand, Spring Green, Merbau,Stone Gray, Sliver Gray, Mirage Gray